Click on the image to check the artwork
Descriptions
Automatic plastic thermoforming machine is special design for PP, PS, PVC,PET,PLA,BOPS Film. This machine is suitable Fruit box, lunch box, egg tray, lid, and other disposal plastic products. The Machine is update according to the mostly development technical, compare with the traditional machine, It can could running more stable and fast
Specification:
Model No. |
PP 550 |
Cutting cycle |
10-25punch/min |
Raw Material |
PP/PS/PET/PVC/PLA |
Forming area |
550*350*70mm |
Heating Power |
Top heater 43kw, bottom heater 41KW |
Total Power |
380V 50HZ 97KW Three-phase and four-wire |
Water Consumption |
0.3m³/h (Tap water or recycle water) |
Air Pressure |
0.5-0.8(mpa) |
Pressure of water supply |
0.2MPa |
Dimensions （L×W×H） |
5000*1675×1900mm |
Area occupied |
8700*3600 |
The maximum width of material |
600mm |
Total Weight |
5500KG |
Mainly Feature
1.The forming mold use motor control ,could adjust the Height in touch screen, easy for operation
2.We supply 24 hours on line after service
3.Touch screen use 15 inch , inside program use photo layout, easy for operation
4.Forming, cutting work independent, could move the distance on the rail.
5.Machine could stack different size, and depth products by robot arm
6.Use big power servo motor control forming and cutting
7.Use Wood board knife cutting, the mold cost is more heaper
8.Use Four pillar holder the mold, diameter is 50 mm, more strong.
Fruit boxes come out in stacking
Line control board
Samples display
http://www.plasthermoforming.com/